Ultrasonic Cleaner BATTLE! VEVOR VS. Harbor Freight! Unboxing, review, and carburetor cleaning!
TLDRIn this video, the host compares two ultrasonic cleaners, an older Central Machinery model and a newly acquired 15-liter Beaver unit. After setting up both cleaners, the host conducts a side-by-side test using Simple Green Degreaser and preheated water. The Beaver unit impresses with its powerful performance, quiet operation, and effective cleaning results, even managing to clean the inside of carburetor bowls without disassembly. The older cleaner, while functional, is significantly outperformed by the Beaver unit, which is deemed a worthy investment despite its higher price point.
Takeaways
- 🔍 The video is a comparative review of two ultrasonic cleaners, one previously owned and another recently purchased from Amazon.
- 🧼 The reviewer was unimpressed with the previously owned cleaner, which is a Central Machinery brand from Harbor Freight, due to its small size and less effective cleaning performance.
- 📦 The new cleaner is a 15-liter model from a different brand, which was purchased to address the size and performance issues of the Harbor Freight unit.
- 💡 The new cleaner came with several large dents on the box, but the unit itself appeared to be undamaged, thanks to sufficient foam packaging.
- 🎁 The new cleaner's package included a parts basket, drain hose, instruction manual, hose clamp, warning sticker, power cord, and a small cage for small parts.
- 🔎 The new cleaner features a digital display with temperature and timer settings, and a warning not to disassemble the unit.
- 🚿 Both cleaners were tested using Simple Green Degreaser and preheated water, aiming to achieve the same cleaning solution ratio.
- 🧽 The new cleaner was able to accommodate a complete carburetor, including slides and cabling, which was not possible with the Harbor Freight unit.
- 🌡️ The new cleaner's heating function took about 50 minutes to reach the target temperature of 50 degrees Celsius.
- 🔇 The new cleaner was significantly quieter and less offensive to the eardrums compared to the Harbor Freight unit, which the reviewer interpreted as a sign of better performance.
- 💦 After cleaning, the parts from the new cleaner showed remarkable improvement, with almost factory-clean conditions, while the Harbor Freight unit's results were less impressive.
Q & A
What are the two ultrasonic cleaners discussed in the script?
-The two ultrasonic cleaners discussed are the Central Machinery brand from Harbor Freight and the Beaver 15-liter model purchased from Amazon.
What were the user's initial impressions of the Central Machinery ultrasonic cleaner?
-The user was not very impressed with the Central Machinery ultrasonic cleaner. They found it to be too small for their needs and were not a fan of the controls on it.
How did the user feel about the condition of the Beaver ultrasonic cleaner upon receiving it?
-The user was initially concerned about the condition of the Beaver ultrasonic cleaner due to several large dents on the side of the package. However, the cleaner seemed well-protected by foam and appeared undamaged.
What are the main features of the Beaver ultrasonic cleaner?
-The main features of the Beaver ultrasonic cleaner include a digital display with temperature and timer settings, a parts basket, a drain hose, an instruction manual, a hose clamp, a warning sticker, a standard three-prong power cord, and a small cage for small parts like jets.
What cleaning solution and water temperature were used in the test?
-The cleaning solution used was Simple Green Degreaser, and the water temperature was preheated to help the cleaning process.
How did the user evaluate the performance of the two ultrasonic cleaners?
-The user evaluated the performance of the two ultrasonic cleaners by comparing their cleaning abilities on Mikuni carbs from a 1995 Skidoo Summit 583. They also compared the noise levels, power, and functionality of the units.
What were the results of using the Beaver ultrasonic cleaner on the Mikuni carbs?
-The Beaver ultrasonic cleaner effectively cleaned the Mikuni carbs, with the outsides appearing factory clean and the insides of the bowls showing minimal residue. The user was thoroughly impressed with the results.
What was the user's final verdict on the Beaver ultrasonic cleaner?
-The user was extremely satisfied with the Beaver ultrasonic cleaner, considering it a worthwhile investment compared to the Harbor Freight unit. They noted that it was twice the price but performed significantly better.
How did the user address the issue of the noise from the ultrasonic cleaners?
-The user acknowledged that the Beaver ultrasonic cleaner was louder but interpreted this as a sign of it working more effectively. They were prepared to tolerate the noise due to the cleaner's superior performance.
What was the user's experience with the drain function of the Beaver ultrasonic cleaner?
-The user found the drain function of the Beaver ultrasonic cleaner to work well, using a simple ball valve system. They noted that the drain cap provided with the cleaner helps prevent debris or small parts from being lost during the draining process.
What were the user's final thoughts on the Harbor Freight ultrasonic cleaner?
-The user was disappointed with the Harbor Freight ultrasonic cleaner, finding it to be ineffective compared to the Beaver model. They mentioned considering it for disposal or keeping it as a backup.
Outlines
🛠️ Unboxing and Initial Comparison of Ultrasonic Cleaners
The video begins with the host introducing the topic of ultrasonic cleaners, mentioning an older, less impressive model and a new one recently acquired from Amazon. The host proceeds to unbox the new cleaner, listing its contents, including a parts basket, drain hose, instruction manual, hose clamp, warning sticker, power cord, and a small cage for smaller parts. Concerns about the condition of the new cleaner due to packaging dents are addressed, but the foam protection seems sufficient. The host compares the included accessories and the build quality of the two cleaners, expressing dissatisfaction with the controls of the older model. The new cleaner features a digital display for temperature and timer settings, and the host highlights the importance of not tampering with the internal components. The video then transitions to a side-by-side comparison of the two units, with a focus on capacity and heating capabilities.
🌡️ Testing and Evaluation of Ultrasonic Cleaners
In this segment, the host turns on the new ultrasonic cleaner to test its display and functionality. The display shows the set temperature and the actual temperature, which is noted to be reasonably accurate. The host increases the timer setting to a full half hour and begins the cleaning process. The comparison between the new cleaner and the older model continues, with the host commenting on the noise levels and the power of the ultrasonic action. After running for approximately 50 minutes, the host examines the cleaned parts, showing significant improvement, especially in comparison to the older cleaner's results. The host also discusses the heating capabilities of the new cleaner, noting that it takes some time to reach the target temperature but is ultimately effective.
🧼 Deep Cleaning Mikuni Carbs with Ultrasonic Cleaner
The host presents two Mikuni carburetors from a 1995 Skidoo Summit as the test subjects for the ultrasonic cleaner. One carb is placed in the older cleaner, which struggles to fully submerge it due to its size limitations. The other carb, with a frozen slide, is placed in the new cleaner, which easily accommodates it. The host uses Simple Green Degreaser as the cleaning solution and preheated water, following recommendations to enhance the cleaning process. After running both cleaners, the host is impressed with the results from the new cleaner, noting that it managed to free the frozen slide and achieve a near-perfect clean. The host also discusses the possibility of using ultrasonic cleaning media to further enhance the cleaning process.
🔧 Final Thoughts and Conclusion on Ultrasonic Cleaners
The host concludes the video by reiterating the effectiveness of the new ultrasonic cleaner, particularly in comparison to the older model. The disassembled carbs are cleaned in the new cleaner, resulting in a thorough and impressive clean. The host expresses satisfaction with the cleaner's ability to clean both the exterior and interior of the carburetors without needing to disassemble them further. The drain function of the cleaner is tested, and the host notes its effectiveness and the inclusion of a drain cap to prevent loss of small parts. The host reflects on the value of the investment, considering the price difference between the two cleaners and the superior performance of the new one. The video ends with the host sharing plans to test the cleaned carbs on the sled and offering to update viewers if any issues arise with the cleaner in the future.
Mindmap
Keywords
💡Ultrasonic Cleaners
💡Central Machinery
💡Harbor Freight
💡Amazon
💡Mikuni Carbs
💡Cleaning Solution
💡Preheated Water
💡Heat and Timing Function
💡Noise Level
💡Cleaning Effectiveness
💡Drain Function
Highlights
The reviewer begins by introducing the topic of ultrasonic cleaners and mentions having experience with two different types.
One of the ultrasonic cleaners is a Central Machinery brand from Harbor Freight, which the reviewer has had for a while but was not very impressed with.
The second ultrasonic cleaner is a recent purchase from Amazon, and the reviewer expresses hope that it will perform better than the Harbor Freight brand.
The reviewer notes the condition of the new cleaner upon arrival, with some large dents but adequate foam protection.
The unboxing of the new ultrasonic cleaner is described, including the contents and accessories provided.
A comparison of the included parts and features between the two cleaners is made, such as the size and power cord.
The reviewer mentions the digital display and control settings on the new cleaner, including temperature and timer settings.
A warning label about not running the unit below two-thirds capacity is highlighted.
The reviewer discusses the cleaning solution used, preheated water, and the heating capabilities of the cleaners.
The cleaning process is demonstrated with before-and-after comparisons of the Mikuni carbs from a 1995 Skidoo Summit 583.
The reviewer comments on the noise levels of the two cleaners, finding the new one much quieter and more powerful.
The cleaning results from both units are compared, with the new cleaner showing significantly better performance.
The reviewer is impressed by the new cleaner's ability to clean the inside of the carburetor bowls without disassembly.
The cleaning solution's effectiveness is noted, with the reviewer considering reusing the water for another cleaning cycle.
The drain function of the new cleaner is tested and found to work well, with a mention of the included drain cap to prevent loss of small parts.
The reviewer concludes with a positive recommendation for the new ultrasonic cleaner, stating it was worth the investment and expressing regret for not purchasing it sooner.
Transcripts
Browse More Related Video
What Happened When I Put These Parts In An Ultrasonic Cleaner - Bike Maintenance
How to use an Ultrasonic Cleaner to Clean Watch Parts: A beginners guide
Ultrasonic Cleaner - How they Work & How they Clean your Carburetor - Fascinating! (Full Version)
Building my own Ultrasonic Cleaner
Hangsun Professional Dental Care Kit- Plaque Remover for Teeth with 5 Adjustable Modes | 2022 REVIEW
What is Pressure? | Physics | Don't Memorise
5.0 / 5 (0 votes)
Thanks for rating: