#1474 Amazing 3D Bloom Effects In This Resin Tray
TLDRThe video script details an artist's process of creating a resin art piece, focusing on achieving a successful 'bloom' effect. The artist begins by preparing a thicker resin, the Platinum Art Coat, and allowing it to sit before adding vibrant, summery colors of ink. They share a new filming perspective, straight down, and discuss their choice of inks, preferring those that spread well for better blooms. The artist experiments with different techniques, including a thinner piping line and additional swirls, to avoid the common issue of the resin's center not blooming. After pouring and waiting, they unveil a beautifully bloomed piece, albeit with a minor imperfection caused by touching the mold with white ink. The video concludes with the artist's satisfaction and a teaser for future content, leaving viewers inspired and eager for more.
Takeaways
- 🎨 The artist is experimenting with a larger piece, a 24-centimeter mold, after facing difficulties with blooming centers in previous projects.
- 🕒 They use Platinum Art Coat resin, known for its thick consistency and long working time of 70 minutes, which is beneficial for achieving good blooms.
- ⌛️ The resin is allowed to sit for 20 minutes before adding inks, following the artist's usual practice with this particular type of resin.
- 🌈 The chosen color palette is bright and summery, with the use of DecoRom inks for their spreading properties and vibrant colors.
- 🔥 A torch is used to clean the mold, but masking tape is preferred over alcohol to avoid distorting the blooms.
- 📏 The artist uses a specific method for calculating the amount of resin needed, considering the resin's ratio and the size of the project.
- 💧 The white layer is made more transparent this time to prevent it from being too heavy and sinking, which was a problem in previous attempts.
- 🖌️ A different piping technique is employed, with thinner lines and additional swirls, to see how it affects the blooming process.
- 🔲 The final piece is un-molded the next day, revealing a successful bloom with a lot of white in the center and a beautiful blend of colors.
- 📉 The artist discovers that touching the bottom of the mold with white resin might have caused a small imperfection, suggesting a lesson learned for future projects.
- 🎥 The video concludes with a positive outcome, demonstrating that the artist's technique and choice of inks can yield beautiful results.
Q & A
What is the main topic of the video?
-The main topic of the video is the process of creating a resin art piece, specifically focusing on achieving a 'bloom' effect with the resin.
What type of resin is being used in the video?
-The video uses Platinum Art Coat resin, which is described as a thick resin with a long working time of 70 minutes.
Why did the artist choose to use a different camera angle?
-The artist chose a straight-down camera angle to provide a clearer view of the process and to avoid having to move around the table or climb a ladder to record.
What is the significance of the 'blooming' effect in resin art?
-The 'blooming' effect refers to the way colors and white layers spread and mix within the resin, creating a visually appealing pattern that is central to the artistry of the piece.
Why did the artist decide not to use alcohol on the mold?
-The artist found that alcohol distorted the blooms, possibly by affecting the way the resin and colors interacted, leading to less successful outcomes in previous attempts.
What is the artist's strategy for mixing colors in the resin?
-The artist mixes the colors by adding them to the resin and then swirling the mixture to achieve a more organic and blended color effect rather than distinct rings of color.
What is the purpose of using a piping bag in this process?
-The piping bag is used to apply the mixed resin in a controlled manner, allowing for precise application of the resin to the mold to create the desired effects.
Why did the artist decide to use a black background for the finished piece?
-The black background is intended to contrast with the colors of the resin piece, making the colors stand out more and enhancing the overall visual appeal.
What was the artist's main challenge in this video?
-The artist's main challenge was achieving a successful bloom, especially in the center of the piece, which had been problematic in previous attempts.
How does the artist determine the amount of resin to use for a piece?
-The artist uses a chart to calculate the amount of resin needed based on the type of resin and the desired outcome, taking into account the ratio of Part A to Part B in the resin mix.
What is the artist's final verdict on the outcome of the piece?
-The artist is pleased with the outcome of the piece, despite a minor issue with a white dot on the mold, and is excited about the successful bloom and color blending.
Outlines
🎨 Artistic Resin Pour Introduction
The artist begins by welcoming viewers to a resin pouring session, expressing hope for a fun and stress-free process. They are attempting a larger pour, 24 centimeters in diameter, after facing difficulties with blooming centers in previous works. The artist shares their method of preparing the resin, using Platinum Art Coat for its thickness and long working time of 70 minutes. They also discuss their decision to avoid using alcohol on the mold, which they believe distorts the blooms. The video transitions into selecting inks for a bright, summery spring color palette, with a preference for Deco Rom inks for their spreading quality.
🌈 Ink Selection and Application
The artist proceeds to spray the selected inks onto the resin, aiming for a turquoise and green color combination with a navy center. They mention using a pin to open a new bottle of ink, reflecting the impromptu nature of the process. The application includes a ring of green and bright yellow, with the artist noting the need to add more color to the Ranger inks for brightness. The focus then shifts to preparing the white resin, with the artist preferring a more transparent look. They also discuss past failures with larger pieces and their strategy to avoid a heavy center in the pour.
🎭 Pouring Technique and Aesthetic Exploration
The artist describes their unique approach to this pour, opting for a different technique by adding more white to the center and swirling it gently. They emphasize the importance of not touching the sides of the mold to maintain the design's integrity. The video captures the artist's experimentation with thin lines and swirls, aiming to prevent the white from dominating the center. The artist also shares their observation that the resin appears to be blooming, indicating a successful pour.
🖌️ Post-Pour Adjustments and Anticipation
After the initial pour, the artist considers adding more blue to the center for visual depth. They discuss the possibility of the blue either staying on top or moving forward when swirled. The artist then decides to swirl the resin, creating an organic look, and expresses excitement about the potential outcome. They compare the appearance to looking through seaweed underwater and decide against adding a fake flower, preferring to see the natural result first.
📊 Resin Calculation and Background Preparation
The artist presents a chart used to calculate the amount of resin needed for the pour, detailing their method for mixing part A and part B of the Platinum 360 Plus resin. They then proceed to add black pigment paste to create a dark background for the resin piece, carefully avoiding contact with the mold's sides to maintain the design. The artist expresses satisfaction with the inks' spreading and their potential impact on the blooming effect. The video concludes with the artist's intent to unmold the piece the following day.
🔍 Unveiling the Finished Pour
The artist excitedly unveils the finished resin pour, noting a small imperfection but overall delight with the result. They reflect on the amount of white used in the pour and its impact on the final piece. The close-up reveals the beauty of the colors and the successful blending of the inks. The artist shares their happiness with the outcome and thanks the viewers for watching, promising more videos to come.
Mindmap
Keywords
💡Pouring your heart out
💡Bloom
💡Resin
💡Working time
💡Inks
💡Piping bag
💡Mold
💡
💡Swirling
💡Unmolding
💡Background
💡Chart
Highlights
The artist is attempting a 'fun bloom' with a 24-centimeter piece, hoping to overcome previous difficulties in achieving blooming centers.
Using Platinum Art Coat resin known for its thick consistency and long working time of 70 minutes.
The artist shares a personal chart for calculating resin quantities based on the type of resin and desired outcome.
Inks used are from the Deco Rom brand, chosen for their bright colors and ability to spread well in the resin.
A new filming perspective is introduced, offering viewers a straight-down look at the process.
The artist has stopped using alcohol on the mold to prevent distortion of the blooms.
A variety of summery, bright colors are used, including navy, forget-me-not, turquoise, and avocado green.
The use of a thinner application of white resin is a deliberate choice to prevent the resin from being too heavy and sinking.
The artist experiments with a different piping technique, creating swirls and lines to see how they affect the blooming process.
A transparent white resin mixture is preferred for this piece to allow the underlying colors to show through.
The artist discusses the challenges of achieving successful blooms in larger pieces over 12 inches.
A black pigment paste is used to create a background for the finished piece, adding depth to the artwork.
The final result is a beautiful bloom with well-spread colors, indicating the success of the experiment.
The artist reflects on the possibility that the type of ink used may affect the blooming process and the final appearance of the resin art.
A lesson is learned about not touching the bottom of the mold with white resin to avoid imperfections.
The successful outcome of the piece confirms that the resin can handle a significant amount of white, despite initial concerns.
The artist expresses excitement and satisfaction with the final result, inspiring confidence for future projects.
Transcripts
Browse More Related Video
5.0 / 5 (0 votes)
Thanks for rating: