Making a WAX SEAL, how hard could it be?
TLDRIn this video, the creator embarks on a journey to make a wax seal stamp using a CNC machine without a computer or numerical control. They design a wooden base and holder for the spoon, then turn a spoon from a piece of wood, carefully shaping it to create a small nib. Despite challenges with 3D printing, they adapt by modeling the stamp on a computer, printing it, and then transferring the design to metal. The video also mentions an upcoming maker event and thanks patrons for their support.
Takeaways
- 🛠️ The video features a CNC machine without a computer or numerical controls, operated manually with dials.
- 🗝️ The creator intends to make a wax seal or stamp for sealing letters using this machine.
- 📦 The CNC machine was purchased from a seller on German eBay who was eager to get rid of it.
- 🪵 A wooden base with divots is needed to hold the candle and the spoon during the crafting process.
- 🥄 The process includes turning a spoon from a chunky piece of wood, leaving extra material for the handle.
- 🔨 The spoon's handle was bent and had to be fixed with a hammer to straighten it.
- 🔧 The creator discusses the inefficiency of certain steps, such as polishing a spoon that will be exposed to heat.
- 🤔 There's a consideration of better ways to turn square stock on the lathe, but the decision to use a round cylinder for better holding in the chuck is made.
- 🖨️ The stamp design is modeled on a computer, 3D printed, and then copied into metal, showcasing a workaround for the lack of CNC capabilities.
- 🎁 The creator received a 3D printer as a gift but struggled with its operation, deciding to give it away to a Patreon supporter.
- 📅 The video ends with a promotion for 'Maker Central,' an event where the creator meets with other makers and viewers.
- 💌 The creator thanks their Patreon supporters and encourages viewers to consider supporting the channel for more content.
Q & A
What type of machine did the speaker purchase?
-The speaker purchased a CNC machine without a computer or numerical controls, which is operated manually using dials.
What is the speaker's intention for the CNC machine?
-The speaker intends to use the CNC machine to create a wax seal or stamp for sealing letters.
What materials are mentioned for making the wax seal or stamp?
-The speaker mentions using a wooden base, a spoon made from a chunky piece of brass, and square brass stock for the stamp.
Why did the speaker intentionally make the spoon's nibban from the same material as the spoon body?
-The speaker wanted to create a consistent design by using the same material for both the spoon body and the tiny nibban.
What issue did the speaker encounter while turning the spoon on the CNC machine?
-The speaker found that the chuck was running untrue, which affected the turning process of the spoon.
How did the speaker address the issue of the bent portion of the spoon?
-The speaker tried to fix the bent portion of the spoon by using a hammer to straighten it.
What was the speaker's approach to creating the stamp for the wax seal?
-The speaker modeled the stamp on a computer, 3D printed it, and then planned to copy it into metal.
What problem did the speaker face with the 3D printer?
-The speaker faced issues with the 3D printer, such as unsuccessful prints and difficulty in getting the desired results.
Why did the speaker decide to give away the 3D printer?
-The speaker decided to give away the 3D printer because they could not get it to work properly despite trying various solutions.
What event is the speaker promoting at the end of the script?
-The speaker is promoting an event called Maker Central, which is scheduled for the 18th and 19th of May.
How does the speaker plan to use the Maker Central event to support their channel?
-The speaker encourages viewers to use their link to purchase tickets for Maker Central, as they will receive a commission which helps support their channel.
Outlines
😀 Crafting a Wax Seal with a DIY Approach
The speaker discusses purchasing a CNC machine without a computer or numerical control, which is operated manually using dials. They embark on a project to create a wax seal or stamp, starting with a wooden base to hold the components. The process involves turning a spoon from a piece of wood, ensuring enough material is left for the handle. Despite challenges with the CNC machine's accuracy, the speaker manages to create a thick-walled spoon and attempts to correct a bent section using a hammer. They also mention the need for a proper holder for the taps and discuss the process of turning square stock into a round cylinder for better handling on the lathe.
😅 Embracing 3D Printing for Custom Stamp Design
The speaker explores the idea of using a 3D printer to create a physical model of a stamp for their CNC machine, despite it not being a CNC machine itself. They model the stamp on a computer and attempt to 3D print it, facing several challenges with the printing process. After unsuccessful attempts and issues with the printer, they decide to give the 3D printer away to a Patreon supporter. The speaker also discusses the limitations of the 3D printed model, such as the lettering being too fine and the need to mirror the design for the stamp, and they consider a more complicated but feasible alternative approach.
🛠️ Adapting Technology for Artistic Creation
The speaker continues their project by preparing the stock for the stamp and using a pantograph machine to trace the design. They mention the need to switch the pantograph for better motion on the Z-axis and discuss the process of creating the stamp design. Despite the complexity and time-consuming nature of the task, the speaker remains optimistic about the outcome. The video concludes with the speaker expressing hope that viewers enjoyed the content and promoting an upcoming event called Maker Central, where they plan to meet other makers and supporters.
📅 Promoting Maker Central and Engaging the Community
In the final paragraph, the speaker promotes an upcoming event called Maker Central, scheduled for the 18th and 19th of May. They express excitement about the opportunity to meet with viewers and other makers, particularly those from the United States who may not have had the chance to meet in person before. The speaker also thanks their Patreon supporters and encourages viewers to consider supporting the channel, which significantly helps with the production of their content. They conclude by thanking the audience for watching and expressing anticipation for the next episode.
Mindmap
Keywords
💡CNC machine
💡Wax seal
💡Pantograph
💡3D printing
💡Resin
💡Spoon turning
💡Chuck
💡Polishing
💡Square stock
💡Z axis
💡Maker Central
Highlights
Purchase of a CNC machine without a computer or numerical controls.
Creation of a wax seal or stamp for letter sealing using a manually controlled CNC machine.
Use of a wooden base with divots for holding the candle and spoon during the process.
Turning a spoon from a chunky piece of wood, including the creation of a tiny nibban from the same material.
Intentional running of the chuck untruly to make the spoon's nibban from the same material.
Conservative material removal from the spoon's interior to avoid breaking through the walls.
Decision to remove the shaft from the spoon after polishing.
Demonstration of a makeshift human clutch for holding taps without a proper holder.
Turning square stock into a round cylinder for better holding in the chuck.
Challenges and inefficiency in using a panograph for the project.
The idea of modeling the stamp on a computer, 3D printing it, and then copying it into metal.
Use of a 3D printer to create a stamp model, despite facing difficulties with the printing process.
Decision to give away the 3D printer due to personal difficulties in getting consistent results.
Preparation of stock for the stamp, focusing on a successful model despite challenges.
The necessity of mirroring the 3D printed stamp model for proper use as a stamp.
Introduction of a more complicated approach to create the stamp due to previous failures.
Setting up the panograph for engraving with a focus on the Z-axis motion.
Promotion of Maker Central event and use of a referral link for ticket purchases.
Acknowledgment and thanks to Patreon supporters and an invitation to support the channel.
Transcripts
5.0 / 5 (0 votes)
Thanks for rating: